This section is dedicated to learning how to monitor and manage your network and devices using Domotz features.
Cisco Catalyst 1200/1330 Series does not run Cisco IOS as operating system, therefore you have to follow the following instructions to enable configuration management (backup/restore) SSH and SNMP should be enabled Domotz need the usage of an admin account with...
What is iPerf3? iPerf3 is a powerful and flexible tool for network performance testing. Its ability to measure key network parameters and provide detailed output makes it invaluable for network administrators and engineers. It measures the bandwidth, delay jitter, and...
The purpose of this article is to explain the distinctions between "Managed devices" and "Unmanaged devices" within Domotz when utilizing the Custom Selection Monitoring feature of the Domotz Collector. Custom Selection Monitoring allows to choose with more...
This section provides detailed insights on your Domotz Collector's general information and settings and allows you to: View and edit the Collector Basic Information (Collector's Name, Location, Time Zone, etc.) Configure the Collector Monitoring Settings such as:...
BrandModelCapabilitiesCommunication Protocol/PrerequisitesABB AP and Gateway-Basic information - firmware version - serial number - model- HTTPAccess Networks Controller/Access Point- Controller C210- Access Point A310- reboot- reboot connected access points via...
BrandModelCapabilitiesCommunication protocolCisco- IOS (SCP) - Catalyst 2960 - Catalyst 3560 - Catalyst 3650 - Catalyst 3750- Catalyst 1200/1300- SG Series (TFTP)- CBS250-48PP-4G 48-Port Gigabit PoE Smart Switch- configuration backup- configuration upload-...
BrandModelCapabilitiesCommunication protocolANY RFC-3621 compliant-- on/off of PoE ports- port mapping is available for RFC-4188 ones- SNMPAraknis- AN-300-SW-8-PoE - AN-210-SW-24-PoE - on/off of PoE ports- port mapping- port PoE consumption- max PoE...
BrandModelCapabilitiesCommunication protocolAPC (American Power Corp.) - Rack PDU, Switched, 1U, 12A/208V, 10A/230V, (8)C13- Rack PDU, Switched, 1U, 16A, 208/230V, (8)C13- Rack PDU, Switched, 2U, 32A, 230V, (16)C13- Rack PDU, Switched, Zero U, 10A, 230V, (16) C13-...
6 min Troubleshoot insights and capabilities.
2 min Automated discovery and inventory on Domotz extended with the additional Routed Networks (e.g. VPNs, Modem networks, routed bubnets).
< 1 minute Move Domotz Agent to new Hardware with our self-service process. Independently move your agent to new hardware when you need to.
Cisco CBS Series – how to enable configuration management (backup/restore) SSH and SNMP should be enabled Domotz need the usage of an admin account with privilege level 15 for this functionality Add the following lines in the configuration file: ip ssh...