Search the Community

Showing results for tags 'ubiquiti'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 4 results

  1. Soft Rebootable Devices

    Domotz Pro supports soft reboot functionality on the following devices: Manufacturer Models Notes Araknis • PoE Switch Chromecast • Chromecast1 • Chromecast2 Eureka based models should be supported Control4 Controllers • Main Controllers • Secondary controllers with prefix (HC[*] and EA[*]) • Touch Panels Crestron DM • DM • MC • PR • TSW • PAC2M • PYNG-HUB • CP3 • CP3N • DIN-AP3 • SWAMP • TPMC-9L Direct TV Currently only the ones with chip vendor: HUMAX Co., Ltd. Draytek • P1100 NuVo • P100 • P3100 • P10/P20/P30 reboot only available for firmware 4.0 + Pakedge • PoE Switch Planet • PoE Switch Sonos Ubiquiti • PoE Switch Yamaha • WXC-50 We should be able to support the following Models (some may lack reboot) "RX-V479", "RX-V579", "RX-A550", "HTR-4068", "TSR-5790", "RX-S601", "RX-S601D", "RX-V679", "RX-A750", "RX-V779", "RX-A850", "RX-A1050", "RX-V1079", "RX-A2050", "RX-V2079", "RX-A3050", "RX-V3079", "HTR-6068", "TSR-7790", "RX-AS710", "RX-AS710D","CX-A5100", "R-N602", "NX-N500", "CD-NT670", "CD-NT670D", "ISX-80", "WX-030", "SRT-1500", "YSP-1600", "YSP-5600", "RX-V481", "RX-V481D", "RX-V581", "RX-A660", "HTR-4069", "HTR-5069", "TSR-5810", "RX-V681", "RX-A760", "RX-V781", "RX-A860", "RX-A1060", "RX-V1081", "RX-A2060", "RX-V2081", "RX-A3060", "RX-V3081", "TSR-7810", "WXA-50", "WXC-50", "R-N402", "R-N402D", "CRX-N470", "CRX-N470D", "ISX-18", "ISX-18D", "WX-010", "YAS-306", "YAS-706", "YSP-2700"
  2. PoE Switches We currently supportAutomated Switch Port Mapping & PoE for the following switches. Updated list as of October 19th, 2017: Brand Model #s Tested Notes Araknis AN-300-SW-8-POE AN-210-SW-24-POE Cisco Cisco SG-xxx Catalyst 2960 Catalys 3560 Catalyst 3650 Catalyst 3750 Draytek Vigor Switch P1100 Vigor Switch P2261 HP 5406Rzl2 2920 snmp based shaman triggered recognition on/off of poe ports port mapping port poe consumption max poe budget model info firmware version info Luxul AMS-2616P AMS-4424P AMS-1208P XMS-5248 XMS-5248 Possible problem when using with VLANs: Fix: Change the allowed VLANS in the VLAN config Midspan POE75U-1UP-N-R POE240U-1MP-N-R POE240U-2MP-N-R POE125U-4AT-N-R POE240U-4UP-N-R POE576U-4MP-N-R POE576U-8UP-N-R POE806U-8MP-N-R snmp based Does not have port mapping! on/off of poe ports model info firmware version info Mikrotik 962UIGS-5HACT2HNT Does not show PoE consumption information Planet SGSW-24040P4 GS-4210 Pakedge SX-24P16 SX-8P Ubiquiti EdgeSwitch models EdgePoint Switch ToughSwitch Unifi models Needs snmp read to be set to public Doesn't need snmp write since the on/off is telnet based Automatic Port Mapping We currently supportAutomated Switch Port Mapping for all the Managed Network switches compliant with RFC4188
  3. PDU & smart plugs Updated list as of Nov 9, 2017: Brand Model #s Tested Capabilities Notes APC · Rack PDU, Switched, 1U, 12A/208V, 10A/230V, (8)C13 · Rack PDU, Switched, 1U, 16A, 208/230V, (8)C13 · Rack PDU, Switched, 2U, 32A, 230V, (16)C13 · Rack PDU, Switched, Zero U, 10A, 230V, (16) C13 · APC-AP7932-Switched-Surge-Protector · UPS Network Management Card (APC UPS NMC2) AP8953 AP9538 AP8930 AP9630 · UPS BG500 · on/off of outlets · outlet power-cycle Amcrest · Amcrest · On/off of outlets Aten · P6208AV · PE6108G · PE8108G · On/off of outlets · Outlet power-cycle · Model info Baytech · Baytech PDU devices (Needs SNMP enabled) · On/off of outlets · Outlet power-cycle Belkin · WeMo Switch · On/off of outlets · Needs snmp enabled Bryant · Bryant Unlimited · On/off of outlets · Outlet power-cycle CyberPower · Snmp based · On/off of outlets · Outlet power-cycle Digital-Loggers · Digital-Loggers 85-240V Smart Switched 1-U Rack · Ethernet Power Controller 5 - Datacenter PDU · On/off of outlets · Outlet power-cycle Edimax · Edimax SP-2101W · On/off of outlets Gude · Gude (Needs SNMP enabled) · On/off of outlets · Outlet power-cycle · Needs snmp enabled JJPlus · JJPlus · On/off of outlets Keene Electronics · Keene Electronics IPSMW1 · On/off of outlets Kankun (and similar JJPlus ones) · Kankun · On/off of outlets Luxul PDU · PDV-1608 · PDV-908 · PDV-202 · On/off of outlets · Outlet power-cycle MegaTech / Megasys PDU · MSN Switch · On/off of outlets · Outlet power-cycle Middle Atlantic PDU · Racklink PDU SW820r · RNLK-SW820R-SP · RLNK-1015V · RLNK-1615V · RLNK-215 · RLNK-215-NS · RLNK-415 · RLNK-915R · RLNK-SW815R-SP · On/off of outlets · Outlet power-cycle · Model Info Middle Atlantic UPS · UPS 2200R · UPS 2200R-8IP · On/off of outlets Orvibo/Wiwo · Smart Socket S20 (WiWo) · Time2 Wi-Fi Smart Socket · WiFi Smart Plug · On/off of outlets Pakedge · P2E, P8, P20 · PE-081 · On/off of outlets · Outlet power-cycle Panamax/Bluebolt · Panamax SM3 · Panamax M4315 · Panamax M4320 · Panamax MB1500 · SM3-PRO · M4000-PRO · VT-4315-PRO · On/off of outlets · Outlet power-cycle · Model Info (some) PS Audio · Play IPC-9000 · On/off of outlets · Needs snmp enabled Raritan · PX3-5146R · PX2-2190CR · On/off of outlets · Outlet power-cycle · Needs snmp enabled SnapAV · WattBox IP +Controllable Outlets · On/off of outlets · Outlet power-cycle SurgeX · SX-AX15E (Needs SNMP enabled) · Axess ELITE · On/off of outlets · Outlet power-cycle · Model Info · Needs snmp enabled Synaccess · NP-02B · NP-0201DT · On/Off of outlets · Outlet power-cycle · Needs telnet · Needs HTTP Time2 · Wi-Fi Smart Socket · On/off of outlets Tripp-Lite · PDUMV20NET · PDUMV30NET · PDUMV20HV · On/off of outlets · Outlet power-cycle · Model Info · Needs SNMP community strings for read/write to be set to default “Tripplite” Ubiquiti/Unifi · Ubiquiti mFI Controllable Power Outlet · On/off of outlets WISPP · WiFi Smart Plug (and similar ones) · On/off of outlets
  4. I also believe more integration into Ubiquiti would be decently easy as they already have a pretty open api. They also have a cloud key that I beleive could run Domotz. https://www.ubnt.com/unifi/unifi-cloud-key/ http://community.ubnt.com/ These guys already integrate into UniFi see below https://home-assistant.io/components/device_tracker.unifi/ https://github.com/home-assistant/home-assistant/blob/dev/homeassistant/components/device_tracker/unifi.py I will make another post for Home-Assistant Thanks