• Announcements

    • GeorgiTsatsev

      Some Agents Stopped Working   10/30/17

      Dear Domotz Users,    
       
      Symptom
      Please be aware that we are currently experiencing a problem on some Domotz Agents that marks them offline and makes them unreachable. This is primarily affecting the users outside of the US/North American countries.  Domotz is actively working on the resolution of this issue to minimize the impact to you and your customers.
       
      Agents Affected
      QNAP
      Synology
      Raspberry Pi
      Virtual Machine - Debian
      Domotz Boxes   Agents that were affected were running older versions of the Domotz Package (older than 2.1.4).   Agents that had the latest package should not be affected by this issue (2.1.4 or higher).   Root Cause
      Domotz is constantly updating the agent software to improve features and ensure device and network security.   In this instance, Domotz was doing a routine agent upgrade and Agents that had older versions of the package running on the hardware ended up in an offline state.  
       
       
      Resolution
      Domotz is actively working to bring back Domotz Boxes.  We have been able to recover a majority of the Domotz Boxes that had this issue through the Provisioning channel (a parallell channel to the software, mainly used for maintenance and provisioning).   For QNAP, Synology, Raspberry Pi and VM installations, it may be necessary for you to reinstall the latest Domotz software.  
      You can find instructions for updating to the latest version for the Raspberry Pi and VM version might be found on the Domotz Portal (https://portal.domotz.com --> Domotz Software --> Install Instruction for Raspberry Pi and Debian).   The new package (2.1.4) has been published on the QNAP store (available for x86-64 models and ARM x41 models (x31+, x31P, x31P2, x31X, X35) with QTS 4.3.0 and above), and on the Synology store.   We sincerely apologize for any inconvenience caused by this outage. We appreciate the fact that this affects your operations and will do our best to minimize the impact.    Regards,
      The Domotz Support Team
iMSP

Ports for Speedtest (perfSonar + NDT)

1 post in this topic

Have setup firewall rules as per https://www.domotz.com/ufaqs/need-configure-firewall/?Display_FAQ=10820

 

However speedtest fails repeatedly saying 'Cannot find an available server'.

 

I understand that speedtest does not always work but I have tried and then waited etc and never connects.

 

Please can you tell me whether additional firewall ports need to be opened for the speedtest to work? Alternatively which logfile to I need to look at or forward to you and how do I PM it across?

 

Thanks in advance

0

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now