I'm trying to figure out how to setup VLAN monitoring in general with Domotz, but I'll use our shop Araknis Router to do it.
So here are the options on the Domotz: (Attached Image - VLAN-01)
1.
The ID is easy enough. I use the ID I setup in the Araknis.
2.
The IP Address seems easy enough, but do I select the new VLAN address that I set on the Araknis of 192.168.30.1?
Or am I supposed to set this address within the DHCP range I set, say 192.168.30.2?
The reason I'm sketchy here, is that the first checkmark says to make sure the IP is not associated with any other device.
3.
I'm not quite sure on the proper settings for the Araknis either (Attached Image VLAN-02). I want to give Domotz access to all devices connected to the VLAN 30 on PORT 4 of the Araknis, but I only want devices connected to PORT 4 to have Internet Access and not be able to see any other devices on VLAN1
FYI, there is only an UN-managed switch connected to VLAN 30/ PORT 4 with a PC connected to that.
Any help to understand ll of this would be awesome!
Chris
VLAN-01.jpg
VLAN-02.jpg
VLAN-03.jpg