Search the Community
Showing results for tags 'lutron'.
Found 2 results
Is it possible to remote access into the client's network to program a Lutron RadioRA2 main repeater? If so, is there a document or video that explains how to get my laptop on the client's network? To save "truck rolls"... having the ability to get my client's networks to program Lutron and RTi, would beneficial... VPN?
Hi all, This is all the steps to connect from remote to your Lutron Processor using Domotz Pro: Lutron Instruction Select the Lutron Processor from the Domotz WebApp → Device list → Device Go in "Connect" tab Click on "Create a TCP tunnel" Insert the Lutron Processor TCP Port. By default "51023" Wait to have the tunnel setup You get two information: Host Port Open Lutron Designer program on your Laptop and: Activate -> Processors --> Remote Access form Insert the previously retrieved Host/Port to be inserted here (see attachment as an example) Save & Apply Now you can use your Lutron tool to to remotely access to the processor: a. Designer+ Tool for Lutron HomeWorks QS: b. Lutron RadioRA 2 System Overview for Lutron RadioRA: Go to the Find Main Repeater Screen from here in the Design Tab And select Advanced, then Remote for System communications as shown here: He should also have had a previous transfer without the checkbox being selected “Restrict Communications to Local LAN”. Let us know if you have any problem. Henrique Salvador Domotz Support firstname.lastname@example.org image (1).webp