Search the Community
Showing results for tags 'rpi'.
Raspberry Pi Model B with Raspbian Jessie installed. I am following the directions from https://portal.domotz.com/portal/hardware/instructions/raspberry and am to the installation step. I enter the dpg.. line but get the following response/error: dpkg: error: parsing file '/var/lib/dpkg/status' near line 0: EOF after field name Help?
Hi. I have had a couple of times when the agent hasn't been reachable from the web-portal. It shows as offline in the iOS app and portal. The Pi itself is still alive in this instance, but a reboot is required to bring the agent back online. (Perhaps there's a console command that would do the same?). Where should I look for logs to troubleshoot why this is happening? Thanks
Lars posted a topic in Raspberry PiConfiguring Multi-VLAN support for Remote Network Monitoring with Domotz Pro Domotz Pro is a remote network monitoring software which supports multi-VLAN configurations for remote network and device monitoring. The software which is designed for integration companies and IT professionals enables a host of network monitoring features including: Remote Access, Remote Power Management, Network Mapping, SNMP, Alerts, Network Diagnostics and more. Read more about Domotz’s Remote Network Monitoring Features. Domotz supports monitoring of multi-VLAN network configuration through a variety of network installation options which include: Self Installation on a Raspberry Pi (i.e. your own Raspberry Pi device), Domotz Box, Windows, Linux, Synology etc. This post will explain how to configure mutli-VLAN support via your own self-installed Raspberry Pi device. Configuring Multi-VLAN support on a Self-Installed Raspberry Pi device for Remote Monitoring Starting from Package version 1.03-201(April 2016) of the Domotz Agent for Raspberry Pi, the full package can be installed on your own Raspberry Pi device and supports the discovery and monitoring of devices hosted on two or more VLANs accessible from the Raspberry Pi. (Instructions and latest package are available at Portal > Add an Agent tab. This short guide is meant for users who have multiple VLAN and are already aware of related configuration and procedures. For further details, and step by step guides, on how to configure VLANs on Switches and Raspberry Pi, the user should refer to detailed guides and or dedicated foruns like the https://www.raspberrypi.org/forums/ . In order to allow the Domotz to discover and monitor devices on two or more VLANs, the user should configure both the Switch and the Raspberry Pi to multiple VLANs: Switch Configuration The interface port of the switch which will be used to connect the Raspberry Pi, should be configured: - in Access mode / Untagged for the main interface used by the Raspberry to communicate with the gateway (e.g. eth0). - in Trunk 802.1q mode / Tagged for the additional VLANs to be monitored (e.g. the eth0.10 used for vlan 10) Please, refer to your specific switch/model guide on how to configure Trunk 802.1q and Access mode (Untagged/Tagged) for the port. Raspberry Pi Configuration (Raspberry Pi OS 10/ Debian Buster 10) In order to configure the Raspberry Pi to access both the main and VLAN interfaces, execute the following steps: 1. Install vlan package and configure modules: sudo apt-get install vlan sudo su echo 8021q >> /etc/modules exit 2. Create and edit the file /etc/network/interfaces.d/vlans E.g. if you want to add the VLAN ID 10 and VLAN ID 20 add the following content to the file auto eth0.10 iface eth0.10 inet manual vlan-raw-device eth0 auto eth0.20 iface eth0.20 inet manual vlan-raw-device eth0 * By convention, a VLAN virtual NIC should follow the naming convention: <physicalNIC>.<PVID> If you have multiple VLANs, you can just add them all to that same vlan file, following the same format. 3. Configure static IP addresses to the new virtual interfaces by editing the file /etc/dhcpcd.conf : # Example of static IP configuration: interface eth0 static ip_address=10.0.20.125/24 static routers=10.0.20.1 static domain_name_servers=184.108.40.206 #static domain_search= interface eth0.10 static ip_address=10.0.10.125/24 static routers=10.0.10.1 static domain_name_servers=220.127.116.11 interface eth0.20 static ip_address=10.0.20.125/24 static routers=10.0.20.1 static domain_name_servers=18.104.22.168 4 - Reboot the Agent, the interface eth0.10 and eth0.20 should be up automatically now.