Joshuaer 0 Posted July 8 Report Share Posted July 8 Is there a way I can create an alert that specifies if a workstation connects to the network that is a specific OS type? I want to create an alert so I know if someone plugs their home laptop into our network. Quote Link to post Share on other sites
Giancarlo 48 Posted July 8 Report Share Posted July 8 this is a very good idea. At the moment, it is possible to be notified if there is a NEW device (in general) connecting to a specified Network, but it does not allow to filter on the OS. So, my recommendation is that on a specific network, where you only expect a certain list of devices connected, you set that Alert so that you are notified as soon as a New Device connects to it. Then you will need to check the OS of that new device. We will take your suggestion as a feature request. 1 Quote Link to post Share on other sites
Joshuaer 0 Posted July 13 Author Report Share Posted July 13 Are you able to set this alert by vlan, or is it just the entire network? Thanks Quote Link to post Share on other sites
Giancarlo 48 Posted July 13 Report Share Posted July 13 2 hours ago, Joshuaer said: Are you able to set this alert by vlan, or is it just the entire network? It is for the entire network that you monitor through Domotz. You can define which VLAN you want to be monitored through Domotz. Quote Link to post Share on other sites
(1)(1)(1)(1)(1)(1).jpg.7dcdeb3fb90919aa2df390a4f448ac4b.thumb.jpg.77bf24b1396f1fd80d63b164713f41ff.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.