henriquesalvador Posted September 4, 2020 Report Share Posted September 4, 2020 Hi All, Here you can find a link to Download our Hyper-V prebuilt image based on Ubuntu Server 20.04: https://domotz-vm-images-temp.s3-eu-west-1.amazonaws.com/Ubuntu_20.04_Domotz_Agent_2.5.9-3.1.0-b001_HyperV.zip To import the image and activate the agent do the following: 1. Open the Hyper-V Manager > Click on Action > Import Virtual Machine...: 2. Select the folder where you Downloaded and extracted the Image above: 3. Select the VM found: 4. Import it using a new unique ID: 5. Select the place where you want to save the VM and its virtual Disk: 6. Click on finish. 7. Once the VM is imported make sure the VM is connected to the correct virtual switch configured in bridge mode, so the VM will get a valid IP Address on the network: 8. Start the VM. To login and see the current IP address use the following credentials: User: domotz Password: domotz 9. At the command prompt run command "ifconfig", the current IP Address will be shown. 10. Activate the agent from a browser access the VM IP address on its port 3000 (e.g. http://192.168.1.104:3000). If you need assistance, please do not hesitate to answer to this thread or contact our Support team: support@domotz.com. Henrique Salvador Domotz Support 1 Quote Link to comment Share on other sites More sharing options...
DCrawley Posted February 7, 2021 Report Share Posted February 7, 2021 doesn't work - cannot find machine Quote Link to comment Share on other sites More sharing options...
Svetek Posted February 14, 2021 Report Share Posted February 14, 2021 Works well. I understand Domotz Box and Domotz Raspberry Pi update automatically. Will the same happen in the VM built from this image or should I do it manually? Quote Link to comment Share on other sites More sharing options...
Giancarlo Posted February 16, 2021 Report Share Posted February 16, 2021 On 2/14/2021 at 1:25 PM, Svetek said: Works well. I understand Domotz Box and Domotz Raspberry Pi update automatically. Will the same happen in the VM built from this image or should I do it manually? Also the Domotz Agent included in those VM (which is based on SNAP) is automatically upgraded by the system. You will need to take care of the Kernel and OS upgrades if any (on the other hand, Domotz manage those as well, automatically and completely transactionally on the Domotz Box) Quote Link to comment Share on other sites More sharing options...
Whaler_99 Posted March 31, 2021 Report Share Posted March 31, 2021 Same as one other user, extracted, all files there, but when I try to import, no virtual machines listed. Quote Link to comment Share on other sites More sharing options...
MarkFC Posted May 28, 2021 Report Share Posted May 28, 2021 Yep, same issue. Extracted files but it can't find the VM on import. Quote Link to comment Share on other sites More sharing options...
henriquesalvador Posted July 29, 2021 Author Report Share Posted July 29, 2021 @MarkFC @Whaler_99 When browsing the folder no VM will be listed, just follow to the next step and the VM will be listed: Quote Link to comment Share on other sites More sharing options...
ABK Posted September 3, 2021 Report Share Posted September 3, 2021 Is there an update version of the image? Quote Link to comment Share on other sites More sharing options...
(1)(1)(1)(1)(1)(1).jpg.7dcdeb3fb90919aa2df390a4f448ac4b.thumb.jpg.77bf24b1396f1fd80d63b164713f41ff.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.