Jump to content

Cannot see vlans on HP switch


Recommended Posts

MauricioC

I have set up the agent on both a Windows server and a Raspberry Pi to test both to see which I would like to keep. On both devices, however, I can only see one VLAN and it's the one the port is assigned to.

 

I have multiple HP Aruba 2530s and an HP Aruba 5400 zl switch. I have read where the port needs to be trunked and I have tested this with the RasPi but it doesn't do anything. I tagged the port on all the VLANs we are looking to monitor but the device comes up offline. When I put the port back on to a vlan it comes online and can see that one vlan and that's it. What am I doing wrong here? Any help is appreciated.

Link to post
Share on other sites
henriquesalvador

Hi @MauricioC,

 

I saw you contact our support regarding this as well. 

 

Only one VLAN has to be untagged, make sure the untagged VLAN is the one with access to the internet. The additional VLANs configure as tagged at the port where the host running the agent is connected to.

 

The Raspberry Pi has to be configured accordingly as well please use the guide we have at our Community (It was recently updated): 

 

Link to post
Share on other sites
Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...