Jump to content
TwistedWorld

Only Ancient Synology devices supported (and not even correctly)?

Recommended Posts

TwistedWorld

I am interested in using Domotz using a Synology NAS. Over the years I have collected a few different models, namely the DS211+, DS212+, DS213+, DS415play and DS216+II.

Following your installation instructions, I can only find Domotz in the Package Center within the DS211+ and DS212+. I installed it on both the DS211+ and DS212+ but neither box shows the package in my main menu / application list even though the Package Center on both boxes show Domotz to be installed. What's up with that?

Share this post


Link to post
Share on other sites
Giancarlo

@TwistedWorld, Synology might have not published all the models, but I'm quite sure we have packages for most of them.

 

For example you can find one package for the DS415play as the following one:

https://portal.domotz.com/download/agent_packages/domotz-syno-evansport-1.1.4-283.spk

 

In any case, from the Synology App Packages stores, I can also see this version (see attached screenshot).

 

Let us know if you can't see this package from the DS415play.

 

On the contrary, we also have the package for the DS216+II:

https://portal.domotz.com/download/agent_packages/domotz-syno-braswell-1.1.4-283.spk

 

but in this case, I confirm the Synology model is not shown on the Synology App Packages store. We will check with Synology about the status of this package. 

 

Note that if you want to install the above package, you have to setup the Synology to allow the installation of packages downloaded out of the official store.

 

If you still have issues or need further clarification, please contact our Support team.

 

 

 

Screen Shot 2016-07-31 at 9.13.24 AM.png

Share this post


Link to post
Share on other sites
TwistedWorld

Hi, thanks a lot for the reply. I'll be looking into the links you gave me, but I already got things up and running on the old Synology for now. I also made a few oopsies when checking out Domotz.

  1. It does indeed show up in the Package Center on the DS415play. I somehow overlooked that.
  2. I found out that I need to connect to the app on port 3000 and there just isn't any icon on my Synology DSM for it.

Thanks again for taking the time to respond to my question! ^_^

Share this post


Link to post
Share on other sites
jon

I have a DS213+ and cannot find the Domotz app in the Package Center. Is there a way to sideload the app?

Share this post


Link to post
Share on other sites
fluvannait

I have an ancient Synology DS211j running DSM 6.1.2-15132 Update 1. I was running an older version of the Domotz agent (version 1.?) and it was working fine. Upgraded the agent to version 2.1 and now it won't start. When I try to start it I get the "Loading..." spinning square and then after 5-10 minutes a pop-up that says:

"Failed to run the package service. Error: Cannot start the package. Please contact support@domotz.com."

Any ideas? Can you get me a link for the older version? It's entirely possible that my DS211j isn't powerfull enough to run the latest agent. .

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×