Jump to content
Sign in to follow this  
Lars

Domotz Agent system requirements

Recommended Posts

Lars

The Domotz Agent has the following system requirements. If your hardware doesn’t meet or exceed them, the Domotz Agent will most likely not work with your hardware.

 

QNAP

QTS 4.3 or later.

Minimum 512MB of RAM

Any x86/x64 processor

Annapurna Alpine

 

Unfortunately QNAP has recently discontinued range of devices, so if your NAS doesn't support QTS 4.3, it won't be able to run Domotz. QNAP offers a product status list here https://www.qnap.com/en/product/eol.php

 

Please contact QNAP support if you don’t know what processor is used in your NAS or what OS it runs.


Raspberry Pi

Raspberry Pi Model B, Raspberry Pi Model B+, Raspberry Pi 2 model B and Raspberry Pi 3 model B.

Note that the Raspberry Pi Model A, Raspberry Pi Model A+ and the Raspberry Pi Zero are not recommended due to hardware limitations.
 

ReadyNAS

OS 6.x or later.

Minimum 512MB of RAM

Any x86/x64 processor

The following ARM based processors: Marvell Armada 370 and Annapurna Alpine.


Synology

DSM 5.x or later.

Minimum 512MB of RAM

Any x86/x64 processor

The following ARM based processors: Marvell Armada 370, 375 and XP.

 

We also anticipate to support the following ARM based processors: Annapurna Alpine, Freescale QorIQ LS1024A/ Mindspeed Comcerto 2000.

 

Note that Marvell Kirkwood processors are not supported, nor are any PowerPC based processors, such as the Freescale PowerQUICC or QorIQ P-series. No models prior to the x10-series are supported.

 

Synology lists the CPU used in their various models on their website, although for older models you might have to contact Synology's support.

 

 

  • Upvote 1

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×