sdogg71 0 Posted August 24, 2016 Report Share Posted August 24, 2016 I haven't been able to find an answer on this. I know that the Domotz Pi will auto update the agent but I don't see any info on updating a non-Domotz Pi's agent. Thanks! Link to post Share on other sites
Silvio 29 Posted August 29, 2016 Report Share Posted August 29, 2016 The Domotz software is made of a "package" which includes an "agent". The agent is updated automatically, and this happens also for non-Domotz PI. But some major releases of Domotz may require a mandatory update of the whole package. In this case you will need to reinstall the whole package, unless you have a Domotz-Box or a Domotz-PI. Link to post Share on other sites
GregS 10 Posted August 29, 2016 Report Share Posted August 29, 2016 How do we know when that is? I like the product, I've converted all my Ihijis to it, however lack of documentation about what is changing between versions can bothersome. For example, my clients all show 1.1.7, but your latest notes only show to 1.1.5. What happened since then? Link to post Share on other sites
Giancarlo 48 Posted August 30, 2016 Report Share Posted August 30, 2016 Domotz periodically updates the release notes on the community forum. Latest release notes are available here: We usually update the list as soon as we have significant changes. I confirm that at the moment the latest version of the Domotz Agent is 1.1.7 as you correctly pointed out. Thanks. Link to post Share on other sites
System_Error_Message 2 Posted September 30, 2016 Report Share Posted September 30, 2016 i reinstalled the entire domotz package and have the latest version of the agent but the web interface shows otherwise. The interfaces shows the agent version of 0.9.4 while the device itself shows version 1.1.7. Because of this i cant reset the agent as it says version not supported. Leaving the pi running domotz for a few hours doesnt show any updates or even changes or any devices. Link to post Share on other sites
Giancarlo 48 Posted October 1, 2016 Report Share Posted October 1, 2016 The Agent is composed of two parts: the external Package (the one you installed, version 0.9.4) and the internal logic (in your case 1.1.7). This internal logic is automatically updated whenever there is a new release with additional functionality. The external part, for obvious reasons, can't be upgraded automatically on your own devices (Raspberry or NAS). In any case, it seems like you did not complete the configuration of the Agent after you complete the reinstallation of the package. Did you proceed with the "resume" of the configuration? You should login in the web interface of the agent, insert your credentials and press resume: usually available on http://<RASPBERRY IP>:3000 Link to post Share on other sites
System_Error_Message 2 Posted October 1, 2016 Report Share Posted October 1, 2016 I did that and it still didnt update externally. Link to post Share on other sites
Giancarlo 48 Posted October 1, 2016 Report Share Posted October 1, 2016 It seems like the Agent is not able to connect to our cloud. I suppose you downloaded the latest package. If so, as soon as you are able to Login within the Web page of the Agent and resume the configuration, it should contact the cloud to update the version there. Which are the Domotz processes running on the Raspberry Pi? Link to post Share on other sites
System_Error_Message 2 Posted October 1, 2016 Report Share Posted October 1, 2016 root 11052 0.3 2.8 40664 25448 ? Ssl 20:53 0:03 /opt/domotz/bin/domotz_node /opt/domotz/lib/node_modules/forever/bin/monitor /opt/domotz/bin/domotz_listener root 11070 0.0 0.2 5804 2216 ? S 20:53 0:00 domotz_zabbix_agentd: collector [idle 1 sec] root 11071 0.0 0.1 5804 1432 ? S 20:53 0:00 domotz_zabbix_agentd: listener #1 [waiting for connection] root 11072 0.0 0.2 5804 2044 ? S 20:53 0:00 domotz_zabbix_agentd: active checks #1 [idle 1 sec] root 11105 0.3 0.5 41848 4980 ? S 20:53 0:03 domotz_zabbix_proxy: configuration syncer [synced config 10730 bytes in 0.199417 sec, idle 30 sec] root 11106 0.0 0.3 41444 3192 ? S 20:53 0:00 domotz_zabbix_proxy: heartbeat sender [sending heartbeat message success in 0.105915 sec, idle 60 sec] root 11107 0.6 0.5 41704 4708 ? S 20:53 0:06 domotz_zabbix_proxy: data sender [sent 0 values in 0.006011 sec, idle 1 sec] root 11108 0.0 0.6 43620 6012 ? S 20:53 0:00 domotz_zabbix_proxy: poller #1 [got 0 values in 0.000017 sec, idle 5 sec] root 11109 0.0 0.6 43604 5688 ? S 20:53 0:00 domotz_zabbix_proxy: unreachable poller #1 [got 0 values in 0.000019 sec, idle 5 sec] root 11110 0.0 0.4 41792 4104 ? S 20:53 0:00 domotz_zabbix_proxy: trapper #1 [processed data in 0.002067 sec, waiting for connection] root 11111 0.0 0.4 41792 4040 ? S 20:53 0:00 domotz_zabbix_proxy: trapper #2 [processed data in 0.001026 sec, waiting for connection] root 11112 0.0 0.4 41792 4096 ? S 20:53 0:00 domotz_zabbix_proxy: trapper #3 [processed data in 0.003861 sec, waiting for connection] root 11113 0.0 0.1 41204 1740 ? S 20:53 0:00 domotz_zabbix_proxy: housekeeper [startup idle for 30 minutes] root 11114 0.0 0.6 43216 5640 ? S 20:53 0:00 domotz_zabbix_proxy: discoverer #1 [processed 0 rules in 0.001942 sec, idle 60 sec] root 11115 0.0 0.4 41464 3848 ? S 20:53 0:00 domotz_zabbix_proxy: history syncer #1 [synced 0 items in 0.000006 sec, idle 5 sec] root 11116 0.0 0.2 41204 1804 ? S 20:53 0:00 domotz_zabbix_proxy: self-monitoring [processed data in 0.000025 sec, idle 1 sec] root 11179 2.7 8.4 132388 74320 ? Sl 20:53 0:29 /opt/domotz/bin/domotz_node /opt/domotz/bin/domotz_listener Link to post Share on other sites
Giancarlo 48 Posted October 2, 2016 Report Share Posted October 2, 2016 I don't see anything strange here. Can you provide me with the domotz agent logs (/var/log/domotz/), even in private (so that you don't spoil private info)? Link to post Share on other sites
System_Error_Message 2 Posted October 3, 2016 Report Share Posted October 3, 2016 i've got the logs, how do i send it to you in private? Link to post Share on other sites
Giancarlo 48 Posted October 12, 2016 Report Share Posted October 12, 2016 sorry for the delay. I seems to have missed this update. Yes, please send me a link to dropbox or directly through PM Link to post Share on other sites
Recommended Posts
Archived
This topic is now archived and is closed to further replies.