Mkcorreia 0 Posted November 23, 2016 Report Share Posted November 23, 2016 (edited) We have jut installed or first instance of domotz at a client site that has multiple ZigBee servers and there are ZigBee remotes that are attached but the servers or remotes do not show up on the ZigBee list, I know this is still in beta but was wondering if this is something that is being looked at??? Edited November 23, 2016 by Mkcorreia Quote Link to post Share on other sites
Tommaso 1 Posted November 24, 2016 Report Share Posted November 24, 2016 Hi, we use control4 primary controller to monitor zigbee devices. Might you use another home automation system? Quote Link to post Share on other sites
Mkcorreia 0 Posted November 25, 2016 Author Report Share Posted November 25, 2016 wW are using the Control4 ea5 as the primary but the next closest node is too far for the remotes to id. What we had to do is make the ea1's behind each display its own zigbee server and coordinator. This is not showing up on the domotz interface only the first instance of the main server is and only the two remotes associated to it. Quote Link to post Share on other sites
Bryan 0 Posted February 22, 2017 Report Share Posted February 22, 2017 This is quite a common occurrence, especially in larger projects, and with the limitation of 3 ZAPs to 1 Zigbee server now. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.