Jump to content

Recommended Posts

Brent

Automatic Port Mapping

Automated Switch Port Mapping is supported for all the Managed Network switches compliant with RFC4188.

 

PoE Managemen

We currently support Automated Switch Port Mapping & PoE for the following switches.

Last Update: June 12, 2019

 

Brand

 

 

Model #s Tested

 

 

Notes

 

 

Araknis

 

 

  • AN-300-SW-8-POE
  • AN-210-SW-24-POE

     

  • on/off of poe ports
  • port mapping
  • port poe consumption
  • max poe budget
  • reboot of device 

     

Cisco

 

 

  • Cisco SG-200
  • Cisco SG-250
  • Cisco SG-300
  • Cisco SG-350
  • Catalyst 2960
  • Catalys 3560
  • Catalyst 3650
  • Catalyst 3750
  • SF220

     

  • SF220 http based
  • on/off of poe ports
  • port mapping  
  • port poe consumption
  • max poe budget 

     

Crestron PoE

 

 

  • CEN-SWPOE-16

     

  • http based
  • on/off of poe ports
  • port mapping
  • port poe consumption
  • max poe budget

     

Draytek

 

 

  • Vigor Switch P1100
  • Vigor Switch P2261

     

  • on/off of poe ports
  • port mapping
  • port poe consumption
  • max poe budget
  • reboot of device (some) 

     

HP

 

 

  • 5406Rzl2
  • 2920 series
  • 2530 series
  • snmp based
  • shaman triggered recognition
  • on/off of poe ports
  • port mapping  
  • port poe consumption
  • max poe budget
  • model info
  • firmware version info

     

Luxul

 

 

  • AMS-2616P
  • AMS-4424P
  • AMS-1208P
  • XMS-5248
  • XMS-1010P

     

  • http based
  • XMS-5248 Possible problem when using with VLANs:

     

    • Fix: Change the allowed VLANS in the VLAN config
  • on/off of poe ports
  • port mapping  
  • port poe consumption
  • max poe budget

     

Midspan

 

 

  • POE75U-1UP-N-R
  • POE240U-1MP-N-R
  • POE240U-2MP-N-R
  • POE125U-4AT-N-R
  • POE240U-4UP-N-R
  • POE576U-4MP-N-R
  • POE576U-8UP-N-R
  • POE806U-8MP-N-R

     

  • snmp based
  • Does not have port mapping!
  • on/off of poe ports
  • model info
  • firmware version info

     

Mikrotik

 

 

  • 962UIGS-5HACT2HNT

     

  • Does not show PoE consumption information
  • on/off of poe ports
  • port mapping
  • reboot of device

     

Netgear

 

 

  • GS728TP
  • GS516TP
  • GC728X
  • on/off of poe ports
  • port mapping
  • port poe consumption
  • max poe budget

     

Planet

 

 

  • SGSW-24040P4
  • GS-4210

     

  • Http based, needs credentials
  • on/off of poe ports
  • port mapping
  • port poe consumption
  • max poe budget

     

Pakedge

 

 

  • SX-24P16
  • SX-8P

     

  • on/off of poe ports
  • port mapping
  • port poe consumption
  • max poe budget
  • reboot of device(some)

     

Ruckus Brocade PoE

 

 

  • ICX7150-C12-Switch

     

  • SNMP based
  • on/off of poe ports
  • port mapping
  • port poe consumption
  • max poe budget
  • model info
  • firmware version info

     

Trendnet

 

 

  • TPE-2840WS
  • TEG-448WS
  • TPE-1020WS

     

  • Needs SNMP read/write
  • on/off of poe ports
  • port mapping
  • port poe consumption
  • max poe budget

     

Ubiquiti

 

 

  • EdgeSwitch models
  • EdgePoint Switch
  • ToughSwitch
  • Unifi models

     

  • Needs snmp read to be set to public
  • Doesn't need snmp write since the on/off is telnet based
  • on/off of poe ports
  • port mapping
  • port poe consumption
  • max poe budget
  • reboot of device (Not EdgePoint)

     

Niveo

 

 

  • VSC7424

     

 

  • max poe budget
  • on/off of poe ports
  • model info
  • firmware version info

 

 

 

 

Share this post


Link to post
Share on other sites
Giancarlo

Few screenshots related to the Automatic Port Mapping and PoE controls:

 

Automatic Port Mapping - Domotz automatically shows the devices connected to each port of the Switch. If the switch is PoE it also reports the power consumption of the port and the control on the status of the PoE for that port.

Details about the port (bandwidth consumption, errors, discarded packets, negotiated bandwidth, etc) are also reported for each switch port:

 

Screen Shot 2019-02-17 at 7.55.44 AM.png 

 

Diagnostics and bandwidth consumption history - for each network switch port, Domotz reports the historical bandwidth consumption, errors and discarded packets, as well as information on the status of the port (admin and config status, negotiated bandwidth, connected device):

Screen Shot 2019-02-17 at 7.56.10 AM.png 

  

Screen Shot 2019-02-17 at 8.06.19 AM.png

 

Direct PoE control on the device connected to the PoE port of the switch - Domotz allows to control the PoE status of the switch port directly from the end device connected to that specific port:

 

Screen Shot 2019-02-17 at 7.57.10 AM.png

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×
×
  • Create New...