ebecker 0 Posted December 6, 2016 Report Share Posted December 6, 2016 directv reboot isn't showing up for me what about also getting antenna strength Quote Link to post Share on other sites
hdsystems 7 Posted December 7, 2016 Report Share Posted December 7, 2016 DirecTV has several models, made by several manufacturers (the same model can be made by a different manufacturer). It will take a little time for Domotz to automatically recognize all the device mac addresses. I also wanted to post the command to retrieve signal strength if Domotz decides to implement it. http://<receiver_ip_address>:8080/serial/processCommand?cmd=FA90 Quote Link to post Share on other sites
hdsystems 7 Posted December 7, 2016 Report Share Posted December 7, 2016 One more note, the Data field that's returned is the signal strength for the current channel in hex format. Quote Link to post Share on other sites
jakeSAV 0 Posted December 13, 2016 Report Share Posted December 13, 2016 I have been speaking with Domotz about this (and signal strength) and have supplied them with some test hardware and the DTV protocol and they are said to be working on it. I also do not see the reboot command though on our end either. Quote Link to post Share on other sites
hdsystems 7 Posted December 14, 2016 Report Share Posted December 14, 2016 Hopefully they can figure out a way to monitor and reboot client devices that are accessed via the ip of the genie and their individual mac address. I know the reboot string is in the protocol. I've noticed several more boxes being recognized and have the reboot command. Still have some DVR's that aren't. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.