Jump to content

Archived

This topic is now archived and is closed to further replies.

nsav

Manual Devices Without Discovery

Recommended Posts

nsav

We use Just Add Power frequently and are able to add their receivers to discovery by configuring the VLAN on the Domotz Box. Transmitters, however are not able to be configured for VLAN because they are passing massive amounts of video traffic. We have static routes in place to connect to Web UI (Port 80) and Telnet (Port 23) on the Transmitters. It would be extremely helpful to manually add the IP addresses of devices that we cannot discover over the VLAN. I see that this is a feature that has been requested previously, but has not been added. Is this in the works to be added? It is a pretty vital feature to use as connecting to Just Add Power devices through Domotz was a major reason to install your product at all of our concepts we manage. 

 

- Brian

Share this post


Link to post
Share on other sites
Tommaso

Hi,

 

the feature has been added. If you have a domotz box just ask to our support providing the MAC address of the box and the list of pair (IP:MAC) fr each device you want to add.

 

Share this post


Link to post
Share on other sites

×
×
  • Create New...