Jump to content
Monthly Subscriptions Are Here Read more... ×

Archived

This topic is now archived and is closed to further replies.

gmedia01

VLAN Monitoring Setup With Araknis Router

Recommended Posts

gmedia01

I'm trying to figure out how to setup VLAN monitoring in general with Domotz, but I'll use our shop Araknis Router to do it.

 

So here are the options on the Domotz: (Attached Image - VLAN-01)

 

1.

The ID is easy enough. I use the ID I setup in the Araknis.

 

2.

The IP Address seems easy enough, but do I select the new VLAN address that I set on the Araknis of 192.168.30.1?

Or am I supposed to set this address within the DHCP range I set, say 192.168.30.2?

 

The reason I'm sketchy here, is that the first checkmark says to make sure the IP is not associated with any other device.

 

3.

I'm not quite sure on the proper settings for the Araknis either (Attached Image VLAN-02). I want to give Domotz access to all devices connected to the VLAN 30 on PORT 4 of the Araknis, but I only want devices connected to PORT 4 to have Internet Access and not be able to see any other devices on VLAN1

 

FYI, there is only an UN-managed switch connected to VLAN 30/ PORT 4 with a PC connected to that.

 

Any help to understand ll of this would be awesome!

 

Chris

 

VLAN-01.jpg

VLAN-01.jpg

 

VLAN-02.jpg

VLAN-02.jpg

 

VLAN-03.jpg

VLAN-03.jpg

Share this post


Link to post
Share on other sites
hdsystems

Try this:

 

Set the IP address to something outside your DHCP range (in the 30.x subnet) or do a reservation in the router.

 

Connect Domotz to LAN3 and change it to tagged for VLAN30 and leave untagged selected for VLAN1. 

 

Set LAN4 for untagged on VLAN30 and excluded for VLAN1. This will put all traffic from the unmanaged switch, connected to LAN4, on VLAN30.

 

When you select the Domotz box in the mobile or web app, it should show the IP address on VLAN1 and 30.

Snip20170313_1.png

Share this post


Link to post
Share on other sites
gmedia01

 

8 hours ago, hdsystems said:

Try this:

 

Set the IP address to something outside your DHCP range (in the 30.x subnet) or do a reservation in the router.

 

Connect Domotz to LAN3 and change it to tagged for VLAN30 and leave untagged selected for VLAN1. 

 

Set LAN4 for untagged on VLAN30 and excluded for VLAN1. This will put all traffic from the unmanaged switch, connected to LAN4, on VLAN30.

 

When you select the Domotz box in the mobile or web app, it should show the IP address on VLAN1 and 30.

Snip20170313_1.png

 

Thanks a lot!

 

It worked well! Now can any traffic from VLAN1 and VLAN30 interact at all, or are they "secured" from each other?

 

Chris

Share this post


Link to post
Share on other sites
hdsystems

Glad it worked!

 

If you have Inter-VLAN routing turned off on VLAN30, it should only be able to access the internet - I'd test it though.

Share this post


Link to post
Share on other sites

×