jamespaulav 0 Report post Posted June 6, 2017 Hi there Any plans to add Ruckus AP's to your list of supported hardware? It would be great to be able to monitor them and reboot them as needed Thanks Share this post Link to post Share on other sites
jamespaulav 0 Report post Posted June 17, 2017 Tumbleweed...... Share this post Link to post Share on other sites
hdsystems 7 Report post Posted June 19, 2017 They have mentioned Ruckus support is coming. They talked about Unleashed specifically in a webinar. Share this post Link to post Share on other sites
jamespaulav 0 Report post Posted June 19, 2017 Thanks so much for the reply @hdsystems - really helpful and sounds promising Fingers crossed they can add the zonedirector controlled systems too Share this post Link to post Share on other sites
Silvio 27 Report post Posted June 20, 2017 Confirmed we will be implementing specific features for access points over the next couple of months. This will include Ruckus, but also some other access points such as meraki, and ubiquity. Share this post Link to post Share on other sites
Springs 0 Report post Posted June 24, 2017 Why would you reboot a running AP? Aside from getting a new IP address??? The only reason to reboot it would be due to lock up. Which would have to be done at the outlet or switch level. Share this post Link to post Share on other sites
jamespaulav 0 Report post Posted June 24, 2017 3 hours ago, Springs said: Why would you reboot a running AP? Aside from getting a new IP address??? The only reason to reboot it would be due to lock up. Which would have to be done at the outlet or switch level. @Springs - when using a 'dumb/unmanaged' POE switch, having the ability to reboot the AP's is extremely useful Share this post Link to post Share on other sites
Springs 0 Report post Posted June 25, 2017 14 hours ago, jamespaulav said: @Springs - when using a 'dumb/unmanaged' POE switch, having the ability to reboot the AP's is extremely useful 14 hours ago, jamespaulav said: For what exactly? Share this post Link to post Share on other sites
jamespaulav 0 Report post Posted June 25, 2017 13 minutes ago, Springs said: For what exactly? If it locks up (you answered this already?) or when using the ethernet 'pass-through' port for a 3rd party device and this isn't operating as it should Im presuming you disagree from your tone - but it would be useful for us Different blokes, different ....... Share this post Link to post Share on other sites
Springs 0 Report post Posted June 30, 2017 My point was that a locked up device can't be rebooted from a message or the like. You still need to cut the power. Share this post Link to post Share on other sites
jamespaulav 0 Report post Posted June 30, 2017 If powered via POE - it can be It only can't if powered via a local mains plug - which isn't how we do our Ruckus installs Share this post Link to post Share on other sites
hdsystems 7 Report post Posted July 11, 2017 What he is getting at is there doesn't need to be any special support for ruckus to reboot it when poe powered. You'd need the switch or outlet (that the injector Is plugged into) to be supported. Share this post Link to post Share on other sites
