Jump to content

TCP Tunnel - Savant from remote


Recommended Posts

Hi all,


This is all the steps to connect from remote to your Savant controller using Domotz Pro:

Savant Instruction

  1. Select the Savant controller device
  2. Go to "Connect" tab
  3. Click on "Open a TCP tunnel"
  4. Insert the SSH TCP Port. By default "22"
  5. Wait to have the tunnel setup
  6. You get two informations:
    • Host
    • Port


  7. Determine the IP address of the remote HOST by pinging it from a terminal (we will update our UI to provide that directly from the portal):
    • MacBook-Pro:~ user$ ping us-west-2-tcp.domotz.co
      PING us-west-2-tcp.domotz.co ( 56 data bytes
      Request timeout for icmp_seq 0
      Request timeout for icmp_seq 1
  8. Open the Savant System Monitor program and:
    • Change the scan type from Local Network to Secure Comm. Mode
    • Insert the previously retrieved <Host_IP_Address>:Port to the field:
    • 002.png
    • Click on Refresh, it will ask the user and password of your system:
    • 003.png


Let us know if you have any problem.


Henrique Salvador

Domotz Support




Link to comment
Share on other sites

  • henriquesalvador pinned this topic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...