Giancarlo 52 Posted February 15, 2018 Report Share Posted February 15, 2018 Updated list as of 6th February, 2020: Manufacturer Specific Model Tested/Supported Notes Domotz Features: Access Networks Controller/Access Point Controller C210 Access Poitn A310 Needs HTTPS to be enabled Needs Advanced plan for full feature set reboot reboot connected access points via director basic information firmware model advanced information Monitor signal strength and noise level of APs by channel Monitor signal strength of connected clients Monitor access point traffic/hardware utilisation network mapping of Controller and Access Points network mapping of Access Points and their WIFI clients Ruckus Controller/Unleashed AP/Standalone AP Zone Director ZD1200 ZD1125 ZD1106 Standalone/Unleashed H500 R300 R500 R510 R600 R610 R700 R710 R720 T300 T301S Needs HTTPS to be enabled reboot reboot connected access points via director basic information firmware model advanced information Monitor signal strength and noise level of APs by channel Monitor signal strength of connected clients Monitor access point traffic/hardware utilization etc network mapping of Zone Director and Access Points network mapping of Access Points and their WIFI clients Araknis AP AN300 Needs Telnet to be enabled reboot Trendnet AP TEW-821DAP TEW-825DAP TEW-740APBO TEW-755AP Needs HTTP and SNMP to be enabled reboot basic information firmware model ABB AP and Gateway Needs HTTP to be enabled basic information firmware serial model Cisco Cisco Meraki AP Cisco Meraki Cloud connection is necessary. reboot basic information firmware model advanced information Monitor signal strength and noise level of APs by channel Monitor signal strength of connected clients Monitor access point traffic/hardware utilization Per device bandwidth consumed. etc Ubiquiti Ubiquiti Unifi AP Unlock the local controller or external unifi controller (via devices external services). reboot basic information firmware model advanced information Monitor signal strength and noise level of APs by channel Monitor signal strength of connected clients Monitor access point traffic/hardware utilization etc Link to post Share on other sites
Giancarlo 52 Posted February 17, 2019 Author Report Share Posted February 17, 2019 Few screenshots related to the WiFi special access point monitoring: Ruckus Special Tab - direct access to enhanced information: Ruckus Radio Info - details on channels, Radio Type, RX/TX data, etc: Ruckus WLAN info Ruckus List of WiFi clients connected to the AP, and their signal level indicator: WiFi client connected to the AP with its RSSI signal level: Access Point System Information (CPU, Memory, bandwidth usage, etc): Link to post Share on other sites
Recommended Posts