Jump to content
Monthly Subscriptions Are Here Read more... ×
Sign in to follow this  
henriquesalvador

TCP Tunnel - Extron from remote

Recommended Posts

henriquesalvador

Hi all,

 

This is all the steps to connect from remote to your Extron controller/Panel using Domotz Pro:

Extron Instructions

1. Select the Extron device from the Domotz WebApp → Device list → Device

2. Go to "Connect" tab

3. Click on "Open a TCP tunnel"

4. Insert the Extron TCP Port. By default you will need to open 4 tunnels for the following ports: 22022, 4522,4502 and 4503.

5. Wait to have the tunnel setup

6. Repeat steps 3 and 4 for each port:

Extron_001.png

7. You will have a host and a port for each TCP Tunnel:

            us-east-1-tcp.domotz.co:32784

                Host: us-east-1-tcp.domotz.co

                Port: 32784

8. Open the .bat file as Administrator (see link below) and enter the requested information on the screen.

9. Connect the Global Configurator to the device on the loopback address that you choose (e.g. 127.0.0.100).

 

Extron.bat

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×